Transparent anti-slip hard-surface tape, AS-50/B
Transparent anti-slip hard-surface tape, AS-50/B Transparent anti-slip hard-surface tape, AS-50/B

Transparent anti-slip hard-surface tape, AS-50/B

Available in two different widths. Price is a starting price. Price from 2,66 €/m

48,53 €
Including VAT. 25.5 %
Delivery time 5 - 9 workdays

FEATURES & ADVANTAGES


AS-50/B Anti-Slip Tape helps to prevent accidental slips and falls due to its special slip-resistant surface. It is a convenient and economical solution improving safety standards in slip hazard areas. It adheres to any surface providing increased traction for better safety.

Anti-Slip Tape is suitable for indoors and outdoors to be used on walkways, stairways, ladders, ramps and steps in warehouses, industrial facilities and marine docks. Can be especially helpful in areas that get extra slick when wet or moist. Quick and easy to apply.


Anti-Slip tapes are available in two versions:

HS (Hard Surface tapes) - excellent anti-slip and wear-resistant texture, suitable for heavy-traffic areas. Note their rough surface is difficult in cleaning and cannot be washed with mops.

SS (Soft Surface tapes) - are a mop-friendly solution, they offer considerably lower anti-slip properties, however they are much easier in mainte nance and cleaning.


TECHNICAL DETAILS


Total thickness after application: 0.7 mm

Back carrier: 0.1 mm PVC

Mineral Type: Aluminum Oxide

Operating temperature: From -40°C to +80°C

Adhesive: Solvent polyacrylate, permanent

Adhesive strength: 23.5 N/25 mm, after 24 hours (180°, FINAT FTM I)

Elongation at break: 25%↑ (PSTC-3 I)

Tensile strength, N/25 mm: 68.0 (Lloud, 500N load cell)

Tear resostamce (g): 5600 ± 200 (PSTC-39)

Resistance to water, chemicals, oils: Excellent

Shelf life: 24 months*

Product durability: 36 months

*properly stored, in the original box, at a temperature of 10-25 ˚C


INSTALLATION INSTRUCTION

1. Make sure that the surface is clean and dry, free of oils, sand or dust.

2. Release a small piece of the release paper.

3. Apply the first part of the tape to the surface and continue removing the release foil gradually.

4. The full adhesive strength is achieved 48 hours after installation. Try to avoid heavy use of the tape during this time.

5. In view of the many types of the surfaces where the anti slip tapes can be applied – the final user should perform his own tests to ensure that the product is suitable for his application and that it meets his demands.


Brochure

Reviews 0 reviews