AS-70 Epoxy Putty Stick
AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick AS-70 Epoxy Putty Stick

AS-70 Epoxy Putty Stick

Hand-mixable, non-rusting epoxy putty that easily repairs or rebuilds anything made of metal, ceramic, concrete, wood or other material.

15,90 €
Including VAT. 24.00 %
Delivery time 5 - 9 workdays

AS-70 Epoxy Putty Stick
Hand-mixable, non-rusting epoxy putty that easily repairs or rebuilds anything made of metal, ceramic, concrete, wood or other material.

GENERAL INFORMATION
Epoxy Putty can be used for sealing holes. It can act as a powerful adhesive fill which binds, sets and makes waterproof a wide range of materials. Once applied it turns into a hard, tough, permanent and waterproof seal. Epoxy Putty will not shrink after hardening and is resistant to most solvents. 60 minutes after application it can be drilled, sanded and painted.


Epoxy Putty can be used on a wide range of metal surfaces such as stainless steel, iron, brass, aluminium, copper, bronze, silver, gold, chromium etc. It can also be applied on PVC, glass, ceramic tiles, fiberglass, wood, concrete etc. In view of the many types of the surfaces where the Epoxy Putty can be applied – the final user should perform his own tests to ensure that the product is suitable for his application and that it meets his demands.
Epoxy putty installed on metal pipe Epoxy putty installed on concrete stairs Epoxy putty installed on plastic pipe.

PHYSIVAL PROPERTIES
Appearance: Dark Gray/Light Gray Stick
Dielectric strength: 300 volts/mils
Mixing time: 1 minute
Working time: 2-3 minutes
Shrinkage: <1%
Temperature: limits - continous -40°C to 121°C
Temperature: limits - intermittent -40°C to 149°C
Chemical resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.
Shelf life: (at 24°C) 24 months minimum
IMPA code*: 81 21 93, 81 22 02, 81 22 93, 81 23 42, 81 29 66, 81 29 70, 81 29 68
*IMPA codes of similar epoxy putties

INSTALLATION INSTRUCTIONS
Prepare the surface proir to applying Epoxy Putty by removing from it any grease or oil. Use sandpaper or a wire brush to slightly roughen the surface – this will improve the adhesion of the Putty.

Cut off or twist off a desired amount of putty. Knead the putty until it achieves a uniform colour. Apply the putty within a maximum of 3 minutes, before the hardening process begins.

Press the putty firmly into any crack or hole. If the Putty is applied onto a wet surface or if it is applied underwater press it forcefully to the area being repaired and keep pressing until the process of hardening and adhesion begins. Keep pressing to achieve a smooth surface. The applied putty can be drilled, filled, sanded and painted 1 hour after application.

SAFETY TIPS
Wear protective gloves to avoid skin irritation or any allergic reactions!

Brochure

Video

Reviews 0 reviews